VINAYAK500 TMT is "HOT ROLLED" from mild steel billets the liquid metal used to make billets is selected only after a through scrutiny by the Spectrometer the billets undergo reduction through a series of continues and fully automatic stands. The stands equipped with computer controlled monitoring device ensure uniform properties in each rebar. Our modern facilities with latest technology insure excellent dimensional tolerance and surface finished, they are subject to online thermo mechanical treatment in three successive stage

  • Quenching,
  • Self Tempering
  • Atmospheric Cooling
  • This gives Vinayak500 TMT is unique combination of higher Strength and Ductility.

    Pure TMT

    • VINAYAK TMT is produce in Fe – 415 & Fe - 500. IS 1786 grades however is carbon leaves are maintained and at much lower than specification which result in excellent ductility. High bendability better corrosion resistance and superior bendability. The other under sizable impurities (like sulphur and phosphorus) that impair the overall longability of rebar inside construction are also maintained at much lower than specification in Vinayak TMT
    • Mechanical Properties

    • Because of its unit method of manufacture Vinayak TMT process combination of strength and ductility that is a far excess of the minimum limit specify in the standard IS 1786 in case of yield strength of Vinayak TMT through the standards specify a min 415 N/n m2 and designers use this value for design the typical value of ductility as measures by elongation is 18% -24% min as against the standard value of 14.5% min this superior value of strength and ductility are guarantee of higher leaves of safety.
    • BENDABILITY

    • Because of the through outer surface and soft core of Vinayak TMT can be bend easily around mandrels much smaller in diameter than the IS 1786 specification this has obvious advantage at construction site.
    • CUTTING AND BENDING

    • Vinayak TMT is introduce for the newly ready build technology in our company we will provide customized cut and bend rebar solution with latest technology for cutting and bending process. Benefits is as per below:-
    • BENEFITS OF CUTTING AND BENDING

    • Length and Shape as per requirement
    • Reduced Wastage.
    • Reability of Steel and Supply
    • Accurate Shape as per need
    • Better Side Productivity
    • Reduce Inventory at Site
    • Better Quality Construction
    • Reduce Project Cost
    • Just in Time Delivery Schedule
    • Smooth Finishing
    • Safety at Site
    • DIMENSIONAL TOLERENCE

    • Vinayak TMT supplied with sectional weight lower than the normal value and is guaranteed for not more than 1% tolerance heavy. This insure higher metergrapher unit weight for Vinayak TMT compared to ordinary rebar.
    • SISMIC RESISTANCE PROPERTY

    • Several study were conducted on concrete beam column joints reinforced with Vinayak TMT evaluate its performance under reputed reserve loading with large formation as would be in countered during on earthquake the energy dissipation was found to be almost same for each cycle. The taste revelled superior seismic resistance property for Vinayak TMT.
    • CORROSION RESISTANCE

    • Vinayak TMT is produce by thermo mechanical treatment therefore there are not tensional residual stress in the bar which results in superior corrosion resistance characteristic compared on account of its composite and uniform microstructure Vinayak TMT has comparatively better corrosion resistance properties compared to other TMT bars.